As soon as the roll-wrapped plastic film starts to unwind in the printing presses, static electricity begins to be charged, and when the friction on the rolls is added, high static charge will be observed on the film surface.

In offset printing machines, overlaid paper bags are fed automatically to the machine one by one. Particularly on fine paper and during the loading of PVC products on the machine, it is observed that the machine takes a short time to stop the machine, causing the printing surfaces to collect dust and reduce the print quality and the operator is constantly exposed to electrical shocks.

When printing on plastic parts in pad printing machines, the parts should not be charged with static electricity. Static electricity is undesirable because the products to be printed will become dusty leading into scraps.

In Profile Figuring Machine, figures are transferred onto the cylinder while the product passes over the rubber rolls. Before the plastic profile enters the machine and at the rubber rolls, material is highly charged.

When the paper bobbin is opened in the printing press, the surface of the paper is charged with static electricity. Undesirable behaviors such as dust and particle attraction are observed on the surface of the paper due to the static before printing and after drying the dryer.

Static electricity in paper folding machines causes many problems These problems are mostly because two or more paper sheets adhering to each other due to the disruptive static charge. In this case, the machine will cause paper stackings and machine stoppage, which will result in improper production.

Flexo printing machines are subject to unfavorable disturbance of static charges on the surface of the film to be printed due to reasons such as separation, friction. In this case, dust and small particles on the area around the surface to be printed will adhere to the surface and no high quality printing can be effected.

Overlapping magazines, books, etc, which are to be packed in packaging machines, are rolled over and even fall down due to the speed and unsteadiness of the band while moving on the conveyor belt, causing damaged and missing packaging to be made.In order to avoid these problems, a static charging bar is placed on the upper part of the stacking unit with opposite poles opposite to each other.

Electrostatic surface is a frequent occurrence in high speed coating and joining machines (Laminating Machine). It is necessary to remove this static charge formed during the joining of two different plastic films.

The Pad, which is a silicone based product in the pad presses, touches the surface to be printed leadig into paint splashes on the static charged pad and print surfaces that will be formed as a result of the rubbing.